en
Products
VERTICAL - CNV - CNV-550
Description
Order Form
Photo Gallery
Video Gallery
Name:
VERTICAL - CNV
Model:
CNV-550
Brand:
CAMPRO
Description
Name:
VERTICAL - CNV
Model:
CNV-550
Brand:
CAMPRO
Campro CNV Series is designed for economy and efficiency.
 
  • The cast iron construction was designed using "Finite Element Analysis (FEA) and Advanced 3D Software and is extremely rigid and provides extremely accurate machining capabilities as well as high metal removal rates.
  • The CNV series was ergonomically designed from the movable control panel to chip disposal and many other design features to reduce operator fatigue and increase working efficiency.
  • Liner guideways on all three axes provide high speed yet rigid machining capabilities for a wide range of maching requirements from small lot size to mass prouduction for the automotive industry.
  • All axes are equipped with direct drive servo motor with coupling.
  • The Z-axis uses a servo motor brake instead of a counterbalance which provides superior surface finishes and accuracy.
CONTENT MODEL CNV-550
TRAVEL
X axis travel mm 550 (21.6")
Y axis travel mm 430 (16.9")
Z axis travel mm 480 (18.8")
Spindle nose to table surface mm 100~580 (39"~22.8")
Spindle center to column surface mm 485 (19")
TABLE
Table dimension mm 650 x 430 (25.5" x 16.9" )
Max. loading weight kg 300 (661)
SPINDLE
Spindle motor kw 7.5 / 11 (15HP)
Spindle speed rpm 8,000 (10,000 / 12,000 / 15,000)
Spindle taper type 7 / 24 taper No.40
AUTOMATIC TOOL CHANGER
No. of tools - 20 (16T)
Max. tool weight kg 7 (15)
Max. tool length mm 250 (9.8")
Max. tool diameter mm Ø80 (3.1")
Tool diameter (Adjacent empty) mm Ø130 (5.1")
Tool change time (Tool to Tool) sec. 2.5
Tool change time (Chip to Chip) sec. 7
FEEDRATE
Rapid feedrate (X/Y/Z) m/min 30 / 30 / 30 (1,181.1 / 1,181.1 / 1,181.1)
Cutting feedrate m/min 10,000 (393.7 ipm)
OTHER
Floor plan (W×D) mm 2,240 x 2,670 (88" x 105")
Machine weight kg 3,000 (6,613)
Max. machine hight mm 2,520 (99")
Power capacity KVA 15
Air pressure source kg/cm2 6~8 (85~113)
CAMPO reserves the right to modify the specifications without further notice.
Standard accessories
8,000 rpm belt type spindle Rigid tapping
Spindle air blast system Pre-tensioned ballscrews on 3 axes
Telescopic covers on 3 axes Pneumatic system
Automatic lubrication system Heat exchanger for electrical cabinet
Optional accessories
10,000 rpm / 12,000 rpm belt type spindle 10,000 rpm / 12,000 rpm / 15,000 rpm I.D.D spindle
Spindle oil cooler Chip screw conveyor
Chain type chip conveyor Coolant through spindle
Deep hole adaptor Coolant flushing device
High pressure coolant pump Linear scales
CNC rotary table Automatic tool length measurement
Workpiece measurement ATC cover
Fully rear cover Air condition
CE modification Transformer
Order Form
Order Form
Name
Company
Phone
Email
Address
Message
 
Photo Gallery
Video Gallery